B Series Ball Valves

Can be selected in accordance with the application pressure from vacuum to 30MPa as well as by the fluids being handled. Special cleaning specification is also available. Non-standard connections can also be made upon request.

CVB Bellows Valves

Ihara industrial bellows valves meet the extreme conditions of general and industrial gas applications. Manufactured with outstanding quality ensures reliability to easily accommodate important system pressures with stability and safety.

CVG Bellows Valves

Ihara industrial bellows valves meet the extreme conditions of general and industrial gas applications. Manufactured with outstanding quality ensures reliability to easily accommodate important system pressures with stability and safety.

In-line Filters

This in-line filter is applied to High purity gas system. Replacement of the element is easy and also excellent in maintenance.
*RoHS compliant

Piston Valves

Through adopting the single acting piston valve (WEARLESS VALVE) which can be corresponding to the Hemming Sealer, because of its effective controlling of the flow rate, the productivity can be improved and also the maintenance cost can be widely reduced even applied for high viscosity & glass beads contained glue.

Stainless Steel Check Valves

This type of stainless check valve is used for cooling water piping system. Its features are excellent cracking characteristics with variety of connections. Rich product lineup is available.
*RoHS compliant

Stop Valves

316 stainless steel body standard pressure to 24.5 MPa wide temperature range -196~230°C choice of stem designs (for vb valve sEries) straight and angle pattern 100% factory tested.

TVR Ball Valves

Can be selected in accordance with the application pressure from vacuum to 30MPa as well as by the fluids being handled. Special cleaning specification is also available. Non-standard connections can also be made upon request.

I-Fit Single Ferrule Tube Fittings

The I-Fit tube fitting has been developed to simplify and replace conventional double ferrule tube fittings. It consists of only 2 parts, body and an integrated nut and ferrule. It simplifies the handing and installation process and avoids loss of back ferrule and misdirection for the ferrules.

TUBE FITTINGS FOR PLASTIC TUBE (EP-FIT)

Fitting developed for plastic tube connections.
It has only 2 items components, the main body and the nut (with a built-in ferrule). Nut tightening is complete by simply a full turning of the nut until contact with the body. Connection with plastic tube can be achieved easily and securely. No cutting or damage to the tubing can occur.

TUBE FITTINGS FOR VINYL HOSE (E1-TOUCH)

Fitting developed for soft vinyl chloride hoses.
It consists of nut, sleeve, o-ring, insert and main body. The design retains the vinyl hose by utilizing an insert inside the hose that locks down with the sleeve through the nut. It can disassembled and reassembled repeatedly. Can be changed from hard to soft piping and has enhanced reliability against water leakage and secure hose connection.

METRIC & SCHEDULE PIPE TUBE FITTINGS

Ihara Science tube fittings with metric dimensions provide a leak-tight seal in an easy install, disassemble, and reassemble procedure. The two-ferrule tube fitting design is resistant to vibration fatigue and withstands high pressures and temperature extremes.

NPT Threaded Fittings

Ihara Science manufactures nominal pipe threaded fittings with a burr-free internal surfaces and smooth thread flanks and are manufactured to provide sealing, minimize galling, and provide tight-fitting installations.

Weldless Fittings (e-fit)

Mechanical pipe fitting (sizes 15A to 50A) designed to substitute welded stainless steel connections. Consist of nut, back ferrule, retainer, o-ring and body. Reduces labor cost of welding, reduces flow resistance for better performance, enables piping change (reassembly) for better maintenance, simple and quick assembly, ideal for areas the prohibit open flames (welding) on site.

Quick Connect Couplers

A stainless-steel one-touch connecting joint enabling quick and easy connection/detachment of fluid pipes for air, water, gas and so on.

Connects to double ferrule type tube fittings, ep-fit and so on are available, as well as thread connection.

*Please email or call for support

ISO Soft Seal Fittings

Soft seal fittings correspond to ISO standards and are applied widely to the machine tool market. As tightening can be completed by fully turning the nut, easy and secure piping work with less variability is realized.

Detachable Fittings for High Temperature

Multiple detachable and high temperature stainless steel fitting to be applied for mold cooling piping. This is suitable for frequent detachments under high temperature heat cycle.

*RoHS compliant
*Please email or call for support

Flexible Braided Metal Hose

SUS316L-made (wetted portion) metallic flexible hose with which you can freely choose the types of connecting fitting such as length and so on. According to usage, you can choose with or without blades in two types respectively, namely the flexible MHM type and the MHF type maintaining its shape.

Tube Cutter

Stainless tubes are precisely cut down under a clean environment such as inside a clean room and so on.

No burrs are left on the exterior surface after cutting, apply automatic welding can be applied without edge face finish.